Technical Information
| SERIES |
THICKNESS |
WEAR LAYER |
UV |
PCS/BOX |
BOX QUANTITY |
SUITABLE FOR |
| INOVO |
1.5 mm |
10 microns |
Yes |
30 |
4.18 Sq.mtr |
Residential |
Installation Guide
- The subfloor surfaces must leave space and free movement. All surface imperfections should be filled and sanded with a portland cement-based latex patching compound.
- Room temperature must be maintained at 18 C or higher before.during installation.
- The flooring must be allowed to acclimate in the room to be in installed for a minimum of 24 hours and be stacked flat on the floor to avoid bending the floor.
- Prior to installation, please ensure that both color and lot are the same.
Maintenance
- Regularly sweep floor to remove sand and grit that can scratch floor.
- For best results, use only water with a mop, Avoid flooding that floor with too much water.
- For heavily soiled areas use a natural ph balenced floor cleaner.
- Use caution when lifting boxes.
- Promptly remove any standing water to avoid slippage.
- Keep Wood Collection on the flat surface to keep it from warping.
